PBSL Group Bullnose Fascia - 405mm x 18mm x 1.25mtr White

Our 404mm wide 18mm thick box end board is used to cut out the wide section of board found at the bottom of aandnbsp;barge boardandnbsp;where it joins the fascia board.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;