Description
Product Detail and Information BuildTak is a thin, durable plastic sheet that adheres to the print bed of FDM (fused deposition modeling) 3D printers to provide an ideal surface for 3D printing. It replaces the need for blue masking tape and/or polyimide films such as Kapton. Composed of high quality, heat-resistant raw materials, BuildTak provides a stable build platform for 3D printed objects to adhere to while allowing for a clean, easy removal of completed builds. BuildTak Offers The Following Benefits Works great with ABS, PLA and more without the need to change the surface. And no more pretreatments such as hairspray or acetone slurry! Easy installation to the bare print bed and clean removal without adhesive residue. Durable and with optimal care can last for many hours of use while providing extended protection to the original print bed surface. Creates an optimal bond between the 3D printed object and the build surface for the duration of the print while preventing curling. When builds are complete, the 3D printed object can be cleanly removed with minimal prying or scraping. Patent-pending heat resistant composition, developed to withstand the typical temperatures used on heated print beds (i.e. 110-125C). With safety in mind, BuildTak is composed of raw materials that are UL flame rated. BuildTak Just Works! Key Features: Works with ABS, PLA, HIPS, PET+, Brick, Wood & Flexible (TPE) filaments; additionally we have had success with getting nylon and t-glase (PETT) to adhere when used with a thin layer of washable glue stick on the BuildTak surface Installs much easier than masking tape or films typically used and with fewer chances of air bubbles Protects build plate Heat resistant and durable, can be reused for many consecutive builds and you can use different filament materials without the need to change the printing surface Creates an optimal bond between the 3D printed object and build surface that maximizes the chances your object will be held in place for the duration of the print and then allow for clean and easy removal of the object from the build surface. FAQ -Frequently Asked Questions What is BuildTak? BuildTak is an ideal 3D printing surface for FFF 3D printers. We believe it offers a superior alternative to using masking tape or heat resistant films (such as kapton) on your FFF 3D printers build plate. BuildTak is a proprietary, patent-pending composition that comes in pre-cut, specially textured plastic sheets that adhere to your build platform with its heat-resistant adhesive backing. Why we think BuildTak is superior over masking tape and heat-resistant films? if you have ever dealt with either masking tape or kapton, one of the more common features you will notice is that the BuildTak sheets are more rigid and therefore much easier to install or apply to the bare build plate and much less susceptible to air bubbles getting trapped beneath the surface. BuildTak is found to be more durable in natur...
