Lay-Filaments Laybrick Sandstone Filament - 1.75 Mm - 250g

LAYBRICK SANDSTONE FILAMENT LayBrick looks and feels like sandstone and is just great for architecture models and landscapes. Printed objects can also be colored and easely grinded. For architecture models / landscapes No plastic feeling Printed objects can be coloured and easely grinded Stics well on print bed No heated bed necessary Contains natural mineralic fillers (super-fine milled chalk) and harmless co-polyesters A new Filament - for huge objects / architecture models (use the entire space of your jumbo printer) Size of the object in video: 30 x 20 x 2 cm 11.8 x 7.9 x 0.8 inch Very rough surface, near sandstone Ideal for jumboprinters Near zero warp !!!    Recommended print settings: Print temp: 165°C to 210°C, smooth to rough surface, 165°C less to 210°C more oozing You may print layer-thickness from 0.1 mm to 0.5 mm Slicing: object fill max. 25%, fan needs to be on It´s recommended to print in rooms with min. 20° Celsius. Colder more brittle If you print with code M227 // values f.e. S:30000 P 10000 Wait after printing until object is hardened, then remove it from platform Temperature stabil to about 70° CelsiusBeta version:     Means that the grey colour of the filament may change in nuances, the filament is also a little maiden, it may brake while bending, you should be sure (especially during a long print) that you can feed a broken part of filament again in your printer. Package:     250 grams of 1.75mm LayBrick Filament