OMP Multi Point Weld In Competition Roll Cage

These roll cages from OMP are designed for Motorsport use but can also be a beneficial safety feature for track day or performance road cars. The cages are designed to be welded into the vehicle.Provides additional protection in the event of a crashAdds torsional rigidity to the chassis improving handlingMost cages meet FIA requirements for Motorsport use (check your application in the guide below)Fitting kit and door bars includedSpecification-These cages are manufactured from FE45 cold drawn steel tubing for a combination of high strength with affordable pricing. The main hoop features tubes with a 50mm diameter x 2mm wall thickness with all other bars having a 40mm diameter and 2mm wall thickness, in accordance with FIA regulations. A diagonal cross brace is used in the rear hoop and a single diagonal bar between the back stays for additional strength and rigidity. These cages are designed to be welded into the vehicle and this work should only be carried out by a competent welder with experience in fitting roll cages.Please note 1: OMP multi point weld in competition roll cages are not suitable for vehicles with factory fitted sunroofs (unless otherwise stated).Please note 2: Some cages may require modifications to the dashboard to allow fitment (please refer to the picture or application guide below for specific vehicle details).OMP Roll Cage Application Guide: This guide contains specific vehicle information for each roll cage including number of attachment points, homologation type, weight and what extra bars are included.